FREQUENTLY ASKED QUESTIONS

Our pontoons are extremely stable and can float up to 400 kg / m2. The safe design load is assumed to be 250 kg / m2.

no problem even if your pontoon is partially on the ground. however, make sure there are no sharp objects where it touches the ground.

Our pontoons are virtually maintenance free, environmentally friendly, lightweight, durable and easy to assemble. In addition, you can expand and change the configuration of your berth from year to year.

The size of one Sunplast module is 1000x500x400 mm. Weight - 11.5 kg. Two modules form 1 m2. The V-DOCK system consists of modules with a size of 500x500x320 mm with a V-cut. Module weight - 6.5 kg. The combination of these modules creates a convenient dry dock for your boat or jet ski.

A significant advantage of plastic pontoons is their low weight, which ensures lightness and ease of assembly. Modular pontoons are easy to unload from a car, move and assemble by the water, even for one person. And the minimum mass of a pontoon launched by rotational molding is 70 kg, and two adult men are required to move an element of such a pontoon.

Apart from routine surface cleaning, the system is virtually maintenance-free. this gives you more time to enjoy your time by the water.

You can use a walkway with a width of 1 m, but for greater stability and safety, we recommend a width of 1.5 m or more. By increasing the number of modules, the stability of the pontoon system in the water can be increased.

We use only European primary raw materials, dyes and light stabilizers. Each batch of raw materials has all the certificates from the manufacturer. On request, we also provide a SES certificate.

Yes, but for ease of assembly, we recommend assembling the pontoons on the shore into sections, and then sliding the sections into the water to connect them.

Our pontoons have optimal dimensions in terms of load-to-flexibility ratio. On a wave, modular pontoons do not take the blow, but bend along with the wave (there is no kink). At the same time, the mesh system provides a huge margin of safety - each module redistributes the load from the wave or boat to the total area of the dock. And with large dimensions of the product, this does not happen, and such a pontoon breaks in the places of the connecting elements.

Our experience shows that these systems are able to withstand severe storms and extreme weather conditions. Reliable anchor systems are an important factor. We recommend using plastic pontoons in protected waters where waves do not exceed 3 points.

Plasti-ko provides a 5-year warranty for all manufactured products.

the design of modular plastic pontoons does not require registration in the "sea and river register of ukraine", since it is a temporary non-self-propelled floating structure. but, in the event that it will be used for public access, it is necessary to order the project from any certified design organization. we provide certified copies of technical specifications and written approval of the design of the pontoon elements by the maritime register of ukraine.

The pontoon is made of durable yet soft plastic that has no sharp edges and will not leave marks on your boat or jet ski. Conversely, most watercraft models do not scratch the pontoon itself. Only if the steps of your boat do cling to plastic, we suggest installing a roller system, it is mounted on a finished pontoon without the need to disassemble it.

We accept orders for the supply and installation of plastic modular pontoons in the cities of Kiev, Odessa, Kharkov, Dnipro, Zaporozhye, and also organize the delivery of modules by any transport company throughout Ukraine and abroad. Each setting is unique and depends on:
- your location
- reservoir (river, sea, lake)
- payment method
- delivery terms, etc.
For purchase, contact us through the Contacts section. Provide as much detail as possible.

pontoons